Main components
- Calcium silicates
- Zirconium oxide
- Thickening agent

Physical Properties:

• Setting time: 3.5 h
• pH: 12<
• Radiopacity: 8mm<

• 1 x 2g Pre-mixed Syringe
• Intra canal tips

How to Use the Product 

• A root canal is prepared using a dental instrument (file).
• After thoroughly removing the remains from the root canal, sterilize and clean the root canal with a solution of hypochlorous acid or EDTA, and dry it using a paper point (if temporary filler remains in the root canal, it may interfere with the product's curing).
• Measure the length of the root canal with a root canal length measuring instrument and a file, then select a suitable gutta-percha master point.
• Mount a disposable tip onto the syringe and then insert it in the root canal.
• Slowly push the syringe bar in the canal to fillthe root canal and slowly pullthe syringe out of the canal. Be careful not to create bubbles or overcharge.
• Insert the gutta-percha master point into the root canal.
• Sever the upper part using a dental appliance (heated plugger).Extra CeraSeal should be removed using a cotton swab or water-soaked cotton pellets.
• Removal of the root canal filling: You can remove this by means of one ofthe usual master point removal  methods

Storage and handling after use:

• Disposable tips are to be used only once and should be discarded after use. (Reusing is prohibited.)
• After use, clean the inlet of the syringe  with gauze and close with a stopper.
• Place the syringe in the aluminum pouch, seal it, and store it in a dry place.
• Keep the syringe in a lying position after use.

Precautions during use:

• Be sure to installa rubber dam in the patient's mouth before using this product.
• Do not press the syringe too hard when injecting CeraSeal because this may cause the patient some pain. (Do not fill beyond the apex.)
• Make sure that an x-ray is taken according to the procedure to confirm the sealing of the root canal.