• Brand - D-Tech
• Prescription - Roth
• Slot size - 022
• Material - Ceramic

• 1 x Bracktet kit (20 pcs)
• Stage 1 Archwires (Alignment wires) -1 x Upper 0.014, 1 x Lower 0.014, 1 x Upper 0.016, 1 x Lower 0.016, 1 x Upper 16x22, 1 x Lower  16x22
• Stage 2 Archwires (Working wires) - 1 x Upper 0.018, 1 x Lower 0.018
• Stage 3 Archwires (Finishing wires) - 1 x Upper 17x25, 1 x Lower 17x25, 2 x Upper 19X25, 2 x Upper 19X25

1. Inspect the Brackets:

   • Before beginning treatment, inspect each bracket to ensure they are intact and free from defects.

2. Prepare the Patient:

   • Ensure the patient’s teeth are clean and dry before bracket placement.

Bracket Placement:

1. Isolate the Treatment Area:

   • Use cheek retractors and absorbent materials to keep the area dry and visible.

2. Apply Bonding Agent:

   • Apply an appropriate bonding agent to the surface of the teeth where the brackets will be placed. Ensure the teeth are etched and primed according to manufacturer instructions.

3. Position the Brackets:

   • Place each D-Tech self-ligating ceramic bracket precisely on the designated tooth. Orient the bracket so that the chamfered slot (mesio-distal orientation) is correctly aligned for optimal wire engagement.

4. Light Cure:

   • Once the brackets are positioned, use a curing light to set the bonding agent. Follow the recommended curing time provided by the bonding material manufacturer.

Wire Engagement:

1. Select the Archwire:

   • Choose the appropriate archwire size and material based on the treatment plan.

2. Open the Self-Ligating Mechanism:

   • Use an appropriate instrument to open the self-ligating mechanism (rotating cap). This allows easy insertion of the archwire into the chamfered slot of each bracket.

3. Insert the Archwire:

   • Carefully insert the archwire into the chamfered slot of each bracket. The unique design of D-Tech brackets should allow the wire to slide smoothly into place without excessive force.

4. Close the Self-Ligating Mechanism:

   • Gently close the self-ligating mechanism (rotating cap) to secure the archwire in place. Ensure the cap rotates smoothly without causing any damage to the archwire surface.

Post-Placement Care:

1. Check and Adjust:

   • After placing all brackets and securing the archwire, check for proper alignment and make any necessary adjustments to ensure optimal positioning and functionality.

2. Instruct the Patient:

   • Provide the patient with instructions on proper oral hygiene, including brushing and flossing techniques specific to braces. Advise on potential discomfort management and follow-up appointments.

Maintenance:

1. Monitor Progress:

   • Regularly monitor the progress of treatment and make adjustments as needed during subsequent appointments.

2. Address Issues Promptly:

   • Address any issues such as broken brackets or discomfort promptly to ensure treatment continues smoothly.