Advantages:

• Re-inforcement Mesh is made from 316 grade stainless steel plated with gold or plain polished.
• These Mesh are very much flexible and can easily adapt any shape.
• It is 0.25 mm thin so can be easily layered between acrylic.
• It gives denture desirable strength

Shelf life and storage:

• Keep locked up and out of the reach of children as they may get hurt from sharp edges.
• No other special storage conditions required.
• Best before 60 months under proper storage.

Golden Pack of 10 Pcs
Silver Pack of 10 Pcs

• Preparation: Ensure the acrylic denture base is properly prepared and ready for incorporation of the reinforcement mesh.
• Cutting: Cut the Maarc reinforcement mesh to fit the specific dimensions of the denture base. Use scissors or a suitable cutting tool to achieve precise sizing.
• Placement: Position the cut reinforcement mesh onto the denture base. It should be sandwiched between layers of acrylic resin during the denture processing.
• Integration: Apply a layer of acrylic resin over the reinforcement mesh, ensuring it covers the mesh completely and adheres well to both the mesh and the denture base.
• Processing: Continue with the normal denture processing steps, such as polymerization or curing, to finalize the denture construction. The reinforcement mesh should be securely embedded within the acrylic layers.
• Finishing: After processing, trim and finish the denture as per usual protocols. Ensure that the reinforcement mesh is evenly distributed and does not protrude or cause discomfort.